Servicing Brisbane — Chermside to Logan
Same-Day Service Available
Lic. 89128 · Fully Licensed & Insured
Servicing Brisbane — Chermside to Logan
Switchboard Upgrades
Old switchboard struggling with modern power demands? Moritz Electrical upgrades Brisbane homes and businesses to safe, compliant switchboards with modern circuit breakers and safety switches — protecting your property and powering today's appliances.
Many Brisbane homes still run on ageing switchboards with ceramic fuses — and some older boards even have asbestos backing. These boards often lack safety switches (RCDs) and can't safely handle the load of modern appliances like air conditioning, induction cooktops, EV chargers and solar.
Upgrading your switchboard brings your home up to current electrical standards, adds RCD protection to your circuits, and gives you the capacity to add the appliances and circuits you need — without nuisance tripping.
Replace ageing fuse boards with modern circuit breakers and a tidy, fully labelled board built to current standards.
Add RCD safety switches to protect every circuit and meet current Queensland safety expectations.
Additional circuits and capacity for air conditioning, EV chargers, solar, granny flats and renovations.
A few clear indicators your switchboard is due for an upgrade.
If your board still has rewirable ceramic fuses or no RCDs, it's outdated and missing modern shock protection.
Persistent tripping, flickering lights or a buzzing board can signal an overloaded or failing switchboard.
High-draw additions often need extra circuits and a board with the capacity to support them safely.
No two boards are the same, so we don't publish a flat price — quoting one sight-unseen would mean padding it. What we can do is tell you exactly what moves the number, so you know what we're looking at when we come out.
A straightforward like-for-like reboard sits at the lower end. Adding circuits for air conditioning, an EV charger, solar or a renovation moves it up.
Most Brisbane homes are single phase. Upgrading to three phase, or moving to a larger main switch, is a bigger job and priced accordingly.
Older boxes are often too small for a modern board, or the meter needs relocating. Some 1960s–80s boards also have asbestos backing, which has to be removed and disposed of properly.
Current standards expect RCD protection across your circuits. If your board has none, that's part of the upgrade rather than an extra.
A tidy, accessible board is quick. Old wiring that turns out to be brittle, undersized or non-compliant once opened up adds time — we tell you before we do it, not after.
Some upgrades need a supply authority disconnect and reconnect, or a service upgrade. Where that applies we handle the paperwork and factor it into the quote.
Every quote is fixed, in writing, and free — we look at the board, tell you what it needs and what it will cost, and you decide from there. No obligation, and no charge for the visit.
As licensed local electricians, we make switchboard upgrades straightforward — assessing your existing board, recommending the right solution for your property, and completing the work cleanly and to code with minimal disruption.
The cost of an upgrade depends on factors like the size of the board, the number of circuits, whether sub-boards or rewiring are required, and the condition of the existing wiring. We assess your setup and give you a clear, no-obligation quote up front.
We work with homes and businesses right across Brisbane's inner east. Find your suburb for local details:
Common signs include ceramic fuses, no safety switches (RCDs), frequent tripping, flickering lights, a burning smell, or an old board that can't keep up with modern appliances. We can inspect it and advise honestly.
An RCD cuts power within a fraction of a second when it detects a fault, protecting against electric shock. Modern Queensland homes are expected to have them on circuits — a switchboard upgrade is the ideal time to fit them.
It depends on the size of your board, the number of circuits, and whether any rewiring or sub-boards are needed. We assess your setup and give you a free, no-obligation quote up front — no surprises.
Most residential switchboard upgrades are completed within a day. Larger or more complex boards can take longer; power is only off for the time needed to do the work safely.
Yes — Moritz Electrical is fully licensed (Lic. 89128) and insured, and all switchboard work is completed to current standards.
Takes less than 30 seconds — we'll get back to you within one business hour.
Prefer to talk? Call 1300 264 816Fully licensed (89128) & insured · $5M public liability
